Archive for ‘Uncategorized’

April 22, 2014

“Why the Fuss?” Explained

by jteaton

Image

“Why the Fuss?” Explained

First-generation anticoagulant rodenticides (FGARs) were developed in the 1940s and are considered “multiple dose” rodenticides, because they typically require multiple feedings by a rodent over time to obtain a lethal dose. Second-generation anticoagulant rodenticides (SGARs) were developed in response to resistance issues reported with the FGARs, primarily warfarin.  CA Department of Pesticide Regulation registered bromadiolone in 1982, brodifacoum in 1983, difethialone in 1997, and difenacoum in 2008. In general, SGARs are more acutely toxic than FGARs because they are designed to be lethal after a single feeding instead of after multiple doses. Since it takes several days for a rodent to die after feeding on an SGAR, rodents may feed on the SGAR bait multiple times before dying. As a result, rodent carcasses may contain residues of SGARs many times over the lethal dose. If a non-target predator feeds on a rodent carcass containing a lethal concentration of an SGAR, the non-target predator can also be impacted by the rodenticide.

Advertisements
August 28, 2013

What about Crack and Crevice Treatments for Bed Bugs?

by jteaton

bed bug1

Preparing for a bed bug job is a task on its own.  Let’s start with the amount of hours spent training technicians prior to any job, then the equipment, and even contract modifications or the creation of a specialized new one.  How many hours would you say you need to train your top-tier and key employees to maintain quality and safety–30, 50 or even 100 hours?

 Next is the selection of products to use: residual insecticides, dust, vacuums, to heat or not, whole house fumigations and sub contracting, and last (for this article) aerosols.  There are so many to choose from.  Opinions are all over the map on what works, what’s best, and what failed.   What matters is what works for you and your customer, right? 

 Let’s take a moment to review the perspective of a technician doing bed bug work: 

1)      It better work   

2)      It better work fast   

3)      I better not get a call back!

 Now let’s review from a Manager or Owner’s perspective:

 1)      More label training  

2)      What if it doesn’t work/waste of time

3)      How long is the residual  

4)      What are the active ingredients 

5)      What’s the signal word 

6)      Is it labeled to spray all over the mattresses

7)      What is the risk of misapplication and violations with techs

8)      Is it cost effective?  

 I know there’s much to add to these two lists, but these are the nuts and bolts.

 J.T. Eaton’s Kills Bed Bugs Plus #217P aerosol answers these questions and more.

There is no resistance to active ingredient Pyrethrin, and the synthetic of Pyrethrin is Permethrin, which offers a great knock- down and residual protection.  The Piperonyl Butoxide at .75% makes the product even more effective, and combines well with these two active ingredients for increased results.  Both ingredients bind to proteins in the insect’s nerves called the voltage-gated sodium channel. That said, if you use our crack and crevice tip in the professional version, it foams!  This encapsulates the bed bugs and fills the all parts of void where the insect rest; therefore more of the product touches the bed bugs. It’s easy to apply and yields instant and long-lasting results.

 From the Manager’s or Owner’s perspective, here are the answers: 

1) A product that foams means less room for mistakes and more of the crack is treated

2) You’ve already used these active ingredients with plenty of success for fleas, ticks and roaches (no surprise here) so you know they work  

3) We have 12 weeks residual on our label,  and independent testing yielded 32 days to knock down half the population

4) See above for active ingredients 

5) “Caution” is the signal word

6) It’s labeled to “spray until damp” for mattresses

7) It’s labeled for roaches, ants and dust mites–can you spray residential kitchens with your current products? What about carpets and shoes or items that can’t normally be laundered?  This helps avoid misapplication

8) Priced lower than the major brands on the market!

 We launched this made-in-America product for industry professionals at an extremely reasonable price.  There are no “Silver Bullets” with bed bug products or equipment, but I assure you, we do have control of the “gun powder and the aim”!

 James Rodriguez, Territory Manager

J.T. Eaton Co., Inc.

October 24, 2012

Fast-Acting Rodent Baits

by jteaton

Many times people think that fast-acting rodent bait means a larger amount of active ingredients, the “more is better” way of thinking. When it comes to rodenticides with an active ingredient like Bromethalin in our Top Gun™ Baits, this is not the case.
Top Gun™ Bait is a product that disrupts energy at a cellular level, causing the rodent to become weaker over a 48-hour period. In a poisoned rodent, fluid builds up around the nerves which results in paralysis and death.
The great thing about this type of bait is that the rodent begins to feel the effects within the first 12 hours or less, so it doesn’t feel like consuming more bait as with second generation anticoagulants where a rodent can feed up to 3 days. Less rodenticide in the blood and stomach of the rodent means less risk of secondary poisoning for non-targets. On average, a mouse can consume just 2.5 grams (a rat 7-8 grams) for a lethal dose; for the most part that’s just a single feeding.
When it comes to secondary poisoning, larger animal needs to consume large amounts of Top Gun™ Bait for a lethal effect. If a cat or dog consumes a dead rodent, they’re not likely to be poisoned. This is good news for the PMP whose customers are now demanding lower-risk products.
For more information, visit http://www.jteaton.com and review the label and MSDS sheets for our Top Gun™ baits.

James Rodriguez
Western Territory Manager
J.T. Eaton Co., Inc.
(818) 640-4587

July 23, 2012

J.T. Eaton Celebrates Eight Decades of Excellence

by jteaton

Image

Three generations of the Baker family have led the Twinsburg, Ohio-based manufacturer.

 July 20, 2012 – PCT Magazine

TWINSBURG, OH — Founded in 1932 by Jasper T. Eaton, J.T. Eaton & Co., started as a mail-order house for pest control products. Stanley Z. Baker purchased the company in 1949, and put the company on the path for product innovation. Company milestones include: •    1962: Baker invents the first commercial paraffin bait block, which is still the industry standard today. •    1979: Baker develops the first glue boards in trays, as we know them today.

Before J.T. Eaton Stick-Em Glue Traps, some professionals used the radiators of their cars in the winter to soften industrial glue boards that were stuck together, and spread the glue across tar paper.

Stanley Baker passed away in 2005, but his sons Ben and Bart Baker continue his legacy of innovation at the company. Dale Baker, vice president of sales, represents the third generation of Bakers to lead the company.

Recent J.T. Eaton innovations include an extremely successful Bed Bug Program, Little Pete Slim Multiple Catch Mouse Trap, Top Loader Bait Stations, Synergetic Green Light Fly Lights and EPA-compliant bait options.

“Because 2012 is J.T. Eaton’s 80th anniversary, we will celebrate with many promotions to thank our customers and staff throughout the year,” said Dale Baker. “And for the National Pest Management Association’s PestWorld conference in October, we are going to have an Anniversary Celebration at the booth with cake. We will also have giveaways that include a customized J.T. Eaton Anniversary tote bag and J.T. Eaton USB drives — with product information and plenty of extra storage space.”

Pest management professionals (PMPs) are encouraged to share their memories of the J.T. Eaton company from over the years on its Facebook page, Facebook.com/pages/JT-Eaton-Co-Inc/210952208943459. Some of the memories will be shared in a book at the PestWorld booth, as well.

June 5, 2012

Trouble with Gophers?

by jteaton

Trouble with Gophers?

Gophers are non-social animals (except during breeding season) and have a territory range of 200 to 2200 sq. ft.–so one gopher can cause plenty of damage in a short period of time.

Let’s review a few facts:

  • Gophers do not hibernate and are active year-round
  • They can be active at all hours of the day
  • In irrigated areas a female can have up to 3 litters  per year
  • Females produce 5-6 per litter
  • Gophers reach sexual maturity at about 1 year of age and can live up to 3 years

A very important aspect of their biology is that they’re very territorial and will violently expel any intruder.  So what does this mean to a PMP doing a treatment?   If you bust through their vertical runs where the mounds (or holes) are, you’re essentially breaking down their front door.   The question I ask PMPs is “what would you do if someone broke down your front door”?  It’s fight or flight time! That said, probing gopher runs, treatments or trapping should, in most cases, always be 8-14 inches away from the mound.

What about bait selection?

Block baits are a little more labor-intensive (similar to trapping) on the first application, but require less applications because, as a block, the bait lasts longer in the soil.  The seeds within the block remain palatable for longer periods of time due to the paraffin binding the seed and bait matrix together. So there’s no real worry about seed going bad in dry or moist soils.

To learn more about gophers and block baits for gophers visit http://www.jteaton.com

James Rodriguez

Territory Manager

J.T. Eaton Co., Inc.

Direct (818) 640-4587